Fiber Optic Tools That You Should Have


You need tools, light wave conductor for the installation and maintenance of fiber-optic cables. Different types of Tools you need for your work:

Splicing Tools

Your name already says, these are the tools you use to melt together with optical fibers. There are many types of these Tools, you can go. They include: the connection by fusion, a lumberjack optical, thermal oven, fiber splice protection sleeves, and other. There are two types of splicing: mechanical and fusion splicing. V PWW-splicing, splicing tools, you can use to hold the two ends of the fiber optic cable so that the light to pass through from one fiber to another.

In the Fusion connect, use the device to align the end faces of the fiber, and then the fuse or cook them together, the glass ends by arc discharge. This method of synthesis many prefer, because it produces a continuous connection between the fibers to ensure that very little light is lost.

Tools for testing of fibers

These are used in production, and Troubleshooting fiber-optic cable. Like all other blocks, the optical fibers problems develop, and you need to define tasks for the departments, to continue to work effectively. There are many aspects of the cable that you can experience. You can check the number of the energy, data transfer cable, interruptions in the cable, and all other aspects that may interest you.

There are many test tools that you can use. You can: faulty Locator, optical identifier, optical power meter and optical time domain reflectometer. For you to get the ideal results when testing an optical cable, you must use the right tool for the examination that interests you. Different tools require different testing procedures; therefore, you need to understand how you can effectively for you to ideal results.

Cleaning Tools

For an optical cable for the transmission of light effectively, it must be free of dirt, oil, dust and other contaminants. The main areas that are cleaned the terminals and cable shoes must. In the case of the cleaning you try, the cables do not touch with bare hands. In order to avoid the pollution of cables. You should also the risk of damage to the ends of the cable to reduce. To clean, the best food, these areas are alcohol and napkins. You need to be careful while cleaning and ensure that you do not damage the cable in the process.


There are different types of fiber optic tools, you need. Always make sure that you have the right tool for the right Job.


Leave A Reply